JuggleGear.com : RSS Best Sellers Feed

Kris Holm Spokes

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 21:47:36 -0600

Kris Holm Black spokes:

New 14gauge spokes (Flat black):
KH 171mm (for 19" rim)
KH 176mm (for 19" rim)
KH 231mm (for 24" rim)
KH 227mm (for 24" rim with Schlumpf hub)
Kh 371mm (for 36" rim)
KH 362mm (for 36" rim with Schlumpf hub)

And while quanities last 13 guage spokes (flat black):
KH 231mm (for 24" rim)
KH 287mm (for 29" rim)
KH 371mm (for 36" rim)

20" Club Freestyle

info@jugglegear.com (Peter Van Thiel) — Fri, 02 Apr 2010 12:04:24 -0600

Free Tire up grade to a sweetskinz Tire.

The new entry-level freestyle unicycle at an amazing price.

The Club Freestyle Unicycle has been designed with the young unicycle club member in mind. This unicycle has everything that you will need to do even the most advanced freestyle tricks on. It also comes with a non-marking top quality freestyle tire so it can be used in gymnasiums.

Features:

Nimbus II coloured frame (4 colours available) with split bearing housings.
High quality 40mm moisture sealed bearings (6203-2rs).
Low tire to frame clearance to help with stand-up tricks.
Wide flange UDC hub for greater wheel strength.
36 spokes.
Robust 36 hole aluminium rim in Black.
114mm freestyle cranks.
Kenda Kikzumbut 20x1.95� high pressure freestyle tire, black with schrader valve.
Quick-release seatpost clamp.
Plastic freestyle pedals, 9/16� thread.
300mm long, knurled anti-twist 25.4mm dia. seatpost in Black.
Black Club Freestyle saddle with Black handle and bumper.
Leg length sizes: Max 33.5" (85cm), Min 29" (73cm) cut down seatpost min 24.5" (62cm).
Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.
To see which size you need Click Here

Available in 4 colours Black, Purple, Green or Orange.
Weight: 5kg.

Kevlar A wick 2*1/8 --sold per foot

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 19:06:26 -0600

Our fire wick is based around the durable Kevlar � organic (para-aramid) fibre, enhanced with our special blend of non-irritant clothing grade fiberglass yarn. The continuous filament fiber we use is about as good as it gets when balancing absorbency, strength, durability, fire rating and user comfort.

Specifically woven into our commercial grade, high absorbency, flameproof textile, with increased absorbency and all wefts (horizontal threads) doubling back on themselves for greater durability (especially in edge wear/fraying). In fact, the weave pattern and tension has been carefully controlled to balance the opposing properties of durability and soak-ability. The result is an optimum capillary effect for fuel soakage and transfer out to the flame whilst still ensuring excellent flame and abrasion resistance and overall strength. It is also lightweight, and has good flexibility, drapability and non-stretch characteristics.

Rest assured our wick does not contain any asbestos (often used in fire proofing), which is known for causing cancer when inhaled. Neither does it contain any sharp or skin burning metallic thread. Metallic threads are sometimes added to give a sense of strength and durability, but we have found the thin metal fibers become brittle with the heat and break to create a hazard to users � especially if performing wraps or fire eating.

Specifications

�50mm wide x 3.2mm thick
�30m roll
�Long life Kevlar � coated glass fibre
�High temperature resistance 650 deg.
�Excellent edge wear resistance

The Ultimate 3 Ball Juggling Kit

info@jugglegear.com (Peter Van Thiel) — Wed, 09 Sep 2009 11:59:44 -0600

The Ultimate 3 Ball juggling Kit

This kit contains 3 (130 gr) 4 pannel juggling balls.

Colors Available:
Green/White Kit
Blue/White Kit
Red/White Kit
Green,Red,Blue/White kit
Green/Black Kit
Red/Black Kit
Blue/Black Kit
Green,Red,Blue/Black kit

And bonus www.JuggleGear.com provides free How to juggle tutorials.

14 Gauge Spokes Stainless Steel

info@jugglegear.com (Peter Van Thiel) — Sun, 04 Oct 2009 13:35:25 -0600

Stainless Steal Spokes:

14g

71mm
129mm
132mm
171mm
184mm
186mm
234mm
256mm
287mm
371mm

Atom Diabolo

info@jugglegear.com (Peter Van Thiel) — Wed, 03 Jun 2009 08:11:10 -0600

This newly developed diabolo from JuggleGear has many great qualities. A ligther diabolo with great bearing and rigided cups, allows for faster spin then most smaller diabolos. Truely a great starter diabolo.
10 cm by 13cm

24" Club Freestyle

info@jugglegear.com (Peter Van Thiel) — Fri, 29 Jan 2010 16:47:58 -0700

The new entry-level freestyle unicycle at an amazing price. With Free funky tire upgrade. See additional images for photos

The Club Freestyle Unicycle has been designed with the young unicycle club goer in mind. This unicycle has everything that you will need to do even the most advanced freestyle tricks on. It also comes with a non-marking top quality freestyle tire so it can be used in gymnasiums.

Features:

Nimbus II coloured frame (3 colours available) with split bearing housings.

High quality 40mm moisture sealed bearings (6203-2rs).

Low tire to frame clearance to help with stand-up tricks.

Wide flange UDC hub for greater wheel strength.

36 spokes.

Robust 36 hole aluminium rim in Black.

114mm freestyle cranks.

Black/white Kenda 24x1.95� high pressure tire (up to 65 PSI).

Quick-release seatpost clamp.

Plastic freestyle pedals, 9/16� thread.

300mm long, knurled anti-twist 25.4mm dia. seatpost in Black.

Black Club Freestyle saddle with Black handle and bumper.
Leg length sizes: Max 33.5" (85cm), Min 29" (73cm) cut down seatpost min 24.5" (62cm).
Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

To see which size you need Click Here
Available in 3 colours Black, Green, or Orange.

Weight: 5kg.

Kris Holm Percussion Leg Armour

info@jugglegear.com (Peter Van Thiel) — Mon, 31 Aug 2009 15:19:32 -0600

Kris Holm Percussion Leg Armour is the first armour designed for the specific demands of unicyclists.

Select Features:

Full coverage of both the front and back of the leg.
Polyurethane inside-leg patches to resist tyre abrasion.
Vented flexible knees are low profile to avoid the unicycle fork crown.
Knee padding extends high above the knee and resists sagging.
Cool and well-vented behind the knee.
Quick and easy to take on and off.
Durable 1200 denier ballistics nylon lined with wicking polyester.
Machine or hand washable.
Sold in pairs.
Weight: 650 g (size L).
Warning: use of this equipment will not guarantee protection against
all injury. Ride within your limits!

Sizing guide:

Size Top Opening Bottom Opening Shin Length
Small 15�" (40cm) 8" (20cm) 11�" (28.5cm)
Medium 17" (43cm) 9" (23cm) 12" (30.5cm)
Large 18�" (47cm) 9�" (24cm) 12�" (32cm)
X-Large 19�" (50cm) 10" (25cm) 13�" (34cm)

JG Flight Club

info@jugglegear.com (Peter Van Thiel) — Wed, 20 Jan 2010 21:53:27 -0700

Molded in beautiful and "super-tough" high impact polyethylene, each club is precisely manufactured with a longer cooling time in the mold which means a stress free club with perfect balance for juggling. Tapered handles are carefully wrapped in white vinyl tape and bodies are decorated with durable laserdust mylar foil. The quality of these clubs will certainly satisfy the needs of any professional juggler.

Nimbus Trials 19" ISIS Uni

info@jugglegear.com (Peter Van Thiel) — Sat, 13 Feb 2010 21:56:10 -0700

A great entry-level trials unicycle with its large volume tire and new super strong ISIS CroMo hub that will allow you upgrade should you want in the future to the KH ISIS cranks.

Featuring:

Wheel-size: 19� (rim diameter).
Frame: Steel, Nimbus II style with 42mm machined bearing housings.
Hub: New Nimbus ISIS Hub, with CrMo spindle.
Cranks: 125mm nimbus venture ISIS cranks.
Pedals: Nimbus DX style pedals (black) with steel pins, 9/16 thread.
Rim: eyeletted double-walled 19" x 42mm 36 hole trials rim..
Saddle: Nimbus gel saddle - with Nimbus logo on back.
Seatpost: Reinforced aluminium 25.4x300mm bolt-on style.
Tire: 20x2.50" Maxxis Creepy Crawler trials, black with schrader valve.
Spokes: 14G.
Seatpost clamp: New double-bolted, aluminium.
Weight: 5.7kg (12.5lb).

Legs length sizes: Min 720mm (28") cut down seat post min 610mm (24").
Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

Kris Holm Pulse Wrist Armour / Gloves

info@jugglegear.com (Peter Van Thiel) — Thu, 13 Aug 2009 13:39:48 -0600

Expert or beginner, everyone falls off unicycles, and falls can end with your hands hitting the ground. KH Pulse gloves are the only gloves purpose-built for unicyclists, and provide comfortable wrist support and palm protection.

Features:

Integrated wrist wrap with semi-flexible splint
Removable, replaceable gel palm pad
Synthetic leather fingertips for improved durability
Cool, breathable fabric on the backs of the gloves
Available in Small or Medium (these gloves are quite a tight fit
and you might need a size larger than you would normally wear).
Sold in pairs.

HB Devil Stick

info@jugglegear.com (Peter Van Thiel) — Wed, 24 Mar 2010 18:58:37 -0600

Made from Canadian maple, this Devil Stick is easiest to perform tricks with because of the slow performance speed. Decorated with glitter foil on the middle and both ends. Very durable. Comes with black rubber handsticks.

Nimbus Gel Saddle

info@jugglegear.com (Peter Van Thiel) — Fri, 29 Jan 2010 09:47:22 -0700

As fitted to many of the Nimbus unicycles, with gel insert for extra comfort, ergonomic front handle, like the Kris Holm seat and low profile contoured cover.

Ideal for freestyle or long distance unicycling. Comes with a robust black vinyl cover with coloured Kevlar fabric side panels and the Nimbus logo embroidered on the back.

The base chassis is the same construction as the latest generation of Kris Holm saddles with bolts instead of nuts for holding on the handles and seat post. This gives a more robust rigid base than older designs and also allows for the fitting of the Kris Holm T-bar handle and reinforcement plate.

Same rear bumper and contoured front handle as the Kris Holm saddle, reinforced plastic base, fits standard seatposts (4 bolts). Weighs 821g.

JG Stage Ball

info@jugglegear.com (Peter Van Thiel) — Wed, 20 Jan 2010 21:54:37 -0700

200mm, 160g - These huge stage balls are absolutely amazing to juggle and are highly visible for any stage performance. Very bright and shiny colors. Made of a fantastic material with some flex making these balls great for juggling. Perfectly round, evenly weighted and virtually seamless. A very popular ball.

Kris Holm Forged Seatpost

info@jugglegear.com (Peter Van Thiel) — Mon, 07 Dec 2009 14:15:53 -0700

Replacement seatpost for Kris Holm (or Onza (or Koxx with shim)) unicycles.

KH Forged bolt-on posts have a one-piece forged plate and top collar that eliminates welds in critical stress areas. Lightweight and very strong, with an additional pin reinforcement added to the forged top piece. Available in 22.2mm, 27.2mm or 25.4mm. 350mm length.

Unicycle Bearings (Single)

info@jugglegear.com (Peter Van Thiel) — Sat, 20 Jun 2009 09:40:02 -0600

*New super low price on 6203-2RS Bearings!* Quality replacement bearings for unicycles. Double-sided sealed bearings.

6203-2RS fits Coker, DM, Dodger, Nimbus, Trainer, UDC unicycles, Carbon fibre unicycles and Sem unicycles, new coker wide hubs and UDC wide CroMo hub.

All our bearings are sealed against dust and moisture, hence the rs (rubber sealed) in their name.
6004-2RS fits splined Onza and Kris Holm unicycles (not the ISIS ones).

ISIS bearings fit Kris Holm, Onza, Nimbus & Qu-Ax ISIS hubs (does not fit Koxx hubs).

Dimensions:
InsideDiameter Outside Diameter Thickness 6203-2RS 17mm 40mm 12mm 6004-2RS 20mm 42mm 12mm ISIS 22mm 42mm 12mm

Check our FAQ on fitting and removing unicycle bearings.

Price is per bearing, if you need a set order quantity 2

Spinning Plate

info@jugglegear.com (Peter Van Thiel) — Wed, 09 Sep 2009 12:08:49 -0600

9" plate. The easiest juggling prop there is! It is a skill that can be taught at any grade level. Its fun and very impressive looking. Comes with a wooden handstick.

Trials Inner Tube

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:10:10 -0600

Don't replace the inner tube in your trials unicycle with a wimpy 20" inner tube, replace it with one that has been designed for the job.

These inner tubes will properly fill a trials (19") tire. These are less likely to puncture than a standard 20" inner tube. They are made with 30% more rubber than standard 20" inner tubes and are clearly more substantial when compared side by side.

Seat Post (22.0mm)

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 15:54:03 -0600

22.0mm diameter standard seat post. Four bolt fittings to fit the majority of unicycle seats. We have both the the extra strong reinforced knurled anti-twist seatposts (as supplied on most of our unicycles), and standard seatposts (in 300 & 400mm only).

Chrome finish. 220, 300, 400, 500 and 700mm long. The standard seatpost are made of thinner metal so are lighter and might not have knurling.

300mm is the standard length for most unicycles. Standard part to fit the majority of unicycles, supplied in a long size for you to cut down to the required size. (Pipe cutter gives an excellent cut without much effort, see instructions in FAQ).

To give you an idea of what size to get, for example for a 20" unicycle,:
220mm long seat post gives: Min 640mm (25"), Max 760mm (30") leg length,
300mm long seat post gives: Min 720mm (28"), Max 840mm (33") leg length,
400mm long seat post gives: Min 820mm (32"), Max 940mm (37") leg length,
500mm long seat post gives: Min 920mm (36"), Max 1040mm (41") leg length
700mm long seat post gives: Min 1120mm (44"), Max 1240mm (49") leg length
Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

For most of our unicycles you will need a 25.4mm seatpost (except Kris Holm, Koxx and Onza).

14 Gauge Spokes Black

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 22:01:46 -0600

Stainless Steal Spokes in Black:

14g

171mm
184mm

26" Nimbus Muni ISIS Hub

info@jugglegear.com (Peter Van Thiel) — Sun, 14 Feb 2010 08:54:00 -0700

New! ISIS splined technology has become a new standard in the cycling industry. ISIS hub/axle/crank arms are designed to withstand more torque than a hub with a square-tapered axle and crank arms. Now comes with brake mounts on the frame!

Please note that this cycle comes standard with Qu-Ax style 165mm ISIS cranks, designed as a beginner crank arm. For pro quality cranks, select Nimbus Venture or Kris Holm ISIS Moment Cranks as an upgrade.

Features:

Saddle - Nimbus Gel
S.P. Diameter - 25.4
S.P. Clamp Style - Double Bolt
S.P. Clamp Size - 25.4
Frame Style - Flat Top
Frame Construction - Steel
Bearing Housing - Machined
Bearing Size - 22 X 42 X 12
Rim Size - 26-inch
Rim Construction - Aluminum Alloy
Rim Type - Double Walled
Tire Size - 26 X 3.0
Tube Size - 26 X 3.0
Tire PSI - 30-50
Hub Type - ISIS
Hub Construction - CrMo Steel
Spoke Count - 36
Crank Arm Length - 165mm
Crank Arm Type - ISIS
Pedal Type - Platform
Pedal Construction - Aluminum
Cycle Weight - 17

Crank Extractor w/ISIS Foot

info@jugglegear.com (Peter Van Thiel) — Fri, 19 Jun 2009 15:36:59 -0600

This new tool will enable riders to remove ISIS crank arms. The tool has a large foot at the base of the extractor. This is needed with ISIS cranks because a standard crank arm removal tool is not fully compatible with ISIS crank arms.

Kris Holm ISIS Moment Cranks

info@jugglegear.com (Peter Van Thiel) — Thu, 18 Jun 2009 19:24:01 -0600

After a full year in development, the Moment is Kris Holm�s next generation of cranks, built for aggressive trials, street and mountain unicycling. Available in lengths of 110, 125, 137, 150 and 165mm.

Features:

ISIS spline is strong and creak-free
Incredibly stiff with an I-beam shape that concentrates metal in high stress areas.
High tensile strength 7075 T6 Aluminium, polished
10 mm Q-factor (outwards flare) keeps a narrow profile while
maintaining adequate ankle bone clearance
Broad, flat profile is optimised for trials and street riding CroMo pedal inserts
Weight (pair): 560g (125mm), 612g (137mm), 664g (150mm) and 682g (165mm)

These will fit all ISIS hubs except Koxx ISIS hubs.

24" Nimbus MUni Cycle with ISIS hub

info@jugglegear.com (Peter Van Thiel) — Sun, 14 Feb 2010 08:53:28 -0700

ISIS splined technology has become a new standard in the cycling industry. ISIS hub/axle/crank arms are designed to withstand more torque than a hub with a square-tapered axle and crank arms. Now with Magura Brake Mounts.

Please note that this cycle comes standard with Qu-Ax style 150mm ISIS cranks, designed as a beginner crank arm. For pro quality cranks, select Nimbus Venture or Kris Holm ISIS Moment Cranks as an upgrade.

Features:

Saddle - Nimbus Gel
S.P. Diameter - 25.4
S.P. Clamp Style - Double Bolt
S.P. Clamp Size - 25.4
Frame Style - Flat Top
Frame Construction - Steel with Magura Brake Mounts
Frame Finish - Powdercoated or Chrome
Bearing Housing - Machined
Bearing Size - 22 X 42 X 12
Rim Size - 24-inch
Rim Construction - Aluminum Alloy
Rim Type - Double Walled
Tire Size - 24 X 3.0
Tube Size - 24 X 3.0 (Duro Wildlife)
Tire PSI - 30-50
Hub Type - ISIS
Hub Construction - CrMo Steel
Spoke Count - 36
Crank Arm Length - 150mm
Crank Arm Type - ISIS
Crank Arm Construction - Aluminum Alloy
Pedal Type - Platform
Pedal Construction - Aluminum
Cycle Weight - 17

Comes with tools and assembly instructions.

Leg length sizes: Max 38" (97cm), Min 34�" (87cm), cut down seat post min 28�" (72cm). Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

Animal Pedals (9/16) Unsealed

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 16:17:13 -0600

Silver, gray, black, green, purple, white, blue, brown and red. Having a tough time deciding on your next pedal upgrade? Can't figure out your next color scheme? Go with your gut...with your animal instinct, maybe?!

WEIGHTS: 21.2 oz

DETAILS: Comes with 2 size replacable allen key pins (with allen keys)and a stencil with box. Pedals are concave.

These pedals work with size #3 Pedal Protectors

Kevlar wick 1.5 x 1/8 inch -- sold per ft

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 19:01:28 -0600

Our fire wick is based around the durable Kevlar � organic (para-aramid) fibre, enhanced with our special blend of non-irritant clothing grade fiberglass yarn. The continuous filament fiber we use is about as good as it gets when balancing absorbency, strength, durability, fire rating and user comfort.

Specifically woven into our commercial grade, high absorbency, flameproof textile, with increased absorbency and all wefts (horizontal threads) doubling back on themselves for greater durability (especially in edge wear/fraying). In fact, the weave pattern and tension has been carefully controlled to balance the opposing properties of durability and soak-ability. The result is an optimum capillary effect for fuel soakage and transfer out to the flame whilst still ensuring excellent flame and abrasion resistance and overall strength. It is also lightweight, and has good flexibility, drapability and non-stretch characteristics.

Rest assured our wick does not contain any asbestos (often used in fire proofing), which is known for causing cancer when inhaled. Neither does it contain any sharp or skin burning metallic thread. Metallic threads are sometimes added to give a sense of strength and durability, but we have found the thin metal fibers become brittle with the heat and break to create a hazard to users � especially if performing wraps or fire eating.

Specifications

�37mm wide x 3.2mm thick
�Long life Kevlar � coated glass fibre
�High temperature resistance 650 deg.
�Excellent edge wear resistance

Main-Cap Brackets

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 10:07:31 -0600

Bracket pairs only, no bolts, nuts or washers. Fits 40-mm OD bearings.

Free shipping on this product

Nimbus Quick Release - 22.0 / 25.4mm

info@jugglegear.com (Peter Van Thiel) — Thu, 13 Aug 2009 15:45:32 -0600

A high quality replacement quick release in black to replace the standard one fitted to the majority of Taiwanese unicycles. As fitted on the Nimbus freestyle unicycles.

Some unicycles have 22.0 or 22.2mm diameter seatposts, but the new UDC range have 25.4mm diameter seatposts. Black painted aluminium. Designed to offer a high clamping force to prevent seat twisting.

Please check what size you need before ordering.

24" Nimbus II Unicycle - ISIS

info@jugglegear.com (Peter Van Thiel) — Fri, 02 Apr 2010 10:12:54 -0600

Fantastic freestyle unicycle from Unicycle.com. Designed specially for the more advanced unicycle tricks. Now with Nimbus ISIS hub and cranks and Nimbus Gel saddle in Blue or Red to match rim.

This has the Nimbus II frames with machined bearing cups. It also has ISIS hub and cranks for extra strength.

Saddle: Nimbus Gel Saddle, low-profile saddle with gel pouch for more comfort, with front handle and rear protective bumper, with Blue or Red panel to match rim.

Seatpost: 350mm long, 25.4mm diameter Nimbus reinforced Aluminium seat post.

Seat Post Clamp: Black Aluminium quick-release clamp.

Frame/Fork: 24" chromed Nimbus II frame with cornered crown making tricks like one-footed riding and stand up tricks easier. This frame has machined bearing cups for added strength and durability.

Hub: Extra strong, CrMO axle Nimbus ISIS hub.

Bearings: 42mm Sealed bearings.

Cranks: 125mm lightweight Aluminium alloy Nimbus freestyle ISIS cranks.

Pedals: Large platform, plastic bmx style pedals, 9/16inch threads.

Spokes: 48 Stainless steel 14G

Rim: Lightweight, box-section, aluminium rim anodised in Blue or Red, with spoke eyelets.

Tire: Massive Hookworm, 2 ply downhill, 24x2.5", black with Schrader valve inner tube.

Weight: 5.8kg

Leg length sizes: Max 37" (94cm), Min 33" (84cm), cut down seat post min 28" (71cm). Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

Nimbus Steel Seat Post (25.4mm)

info@jugglegear.com (Peter Van Thiel) — Fri, 02 Oct 2009 09:39:25 -0600

25.4mm diameter standard seat post. Four bolt fittings to fit Nimbus, Viscount, Dodger, Trainer, Kris Holm, Velo and the majority of unicycle seats.

This diameter seatpost fits the new Unicycle.com frames and the Qu-Ax frames.

Anti-twist knurling with chromed finish. 220, 300, 350, 400, 500 and 700mm long.

300mm is the standard length on most unicycles. Supplied in a long size for you to cut down to the required size. (Seatpost cutting tool gives an excellent cut without much effort, see instructions in FAQ).

To give you an idea of what size to get, for example for a 20" unicycle,:
220mm long seat post gives:
Min 640mm (25"), Max 760mm (30") leg length,
300mm long seat post gives:
Min 720mm (28"), Max 840mm (33") leg length,
350mm long seat post gives:
Min 770mm (30"), Max 890mm (35") leg length,
400mm long seat post gives:
Min 820mm (32"), Max 940mm (37") leg length,
500mm long seat post gives:
Min 920mm (36"), Max 1040mm (41") leg length
700mm long seat post gives:
Min 1120mm (44"), Max 1240mm (49") leg length

Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

Qu-Ax Lightweight ISIS Cranks

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 10:54:08 -0600

Aluminium cranks to fit ISIS hubs, designed for beginners trials, cross-country and freestyle riding (not recommended for heavy jumping). Available in 100, 114, 125, 145 and 170mm lengths.

Material: Aluminium
Length: 100mm, 114mm, 125mm, 145mm or 170mm.
Weight: 245g / 270g / 320g / 380g / 570g (pair)
Type: ISIS splined.
Q-Factor: Zero (except 170mm) - This is the amount a crank bends
outwards. Zero means it doesn't lean outwards at all. The straighter the crank the better for speed, the wider the better for ankle clearance and greater manoeuvrability.

Crank length is measured from the centre of the axle hole to the centre of the pedal hole.
Picture A shows the 114mm cranks (100mm are similar)
Picture B shows the 125mm cranks (145mm are similar)
Picture C shows the 170mm cranks.

Sold in pairs.

If you need stronger ISIS cranks we recommend you look at the KH Moment, Onza Tensile or Qu-Ax CroMo ISIS Cranks.
These will fit all unicycle ISIS hubs with the exception of Koxx Isis hubs

Nimbus 29" ISIS Unicycle

info@jugglegear.com (Peter Van Thiel) — Fri, 02 Apr 2010 10:04:03 -0600

Now with ISIS hub and cranks and machined bearing housings. This is a strong lightweight quality road/commuting unicycle with matching seat and aluminium rim, in Red or Blue.

Saddle: Nimbus Gel saddle - similar to KH but with lower profile and gel pad for extra comfort, with front handle and rear protective bumper, and coloured panel to match the rim.
Seatpost: 25.4mm dia. 300mm long Nimbus reinforced Aluminium seat post.
Seat Post Clamp: Aluminium double-bolted seat post clamp.
Frame/Fork: New Nimbus 29" frame with machined bearing housings, rounded crown; chromed.
Hub: Nimbus ISIS hub Black with CrMo spindle.
Bearings: 42mm bearing sealed bearings.
Cranks: 125mm lightweight ISIS aluminium cranks.
Pedals: Black aluminium outdoor pedals with steel pins for extra grip, 9/16inch threads.
Spokes: 36 Stainless steel 14G
Rim: Super-wide lightweight aluminium rim anodised in Red or Blue.
Tire: Super size Schwalbe Big Apple tyre, 28x 2.35" road tyre, black with Schrader valve.
Weight: 5.9kg (13 lbs)

Leg length sizes: Max 38" (96cm), Min 34" (87cm), cut down seat post min 30" (76cm). Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

THIN Kevlar � wick 1 x 1/16inch -- sold per ft

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 18:56:20 -0600

Our fire wick is based around the durable Kevlar � organic (para-aramid) fibre, enhanced with our special blend of non-irritant clothing grade fiberglass yarn. The continuous filament fiber we use is about as good as it gets when balancing absorbency, strength, durability, fire rating and user comfort.

Specifically woven into our commercial grade, high absorbency, flameproof textile, with increased absorbency and all wefts (horizontal threads) doubling back on themselves for greater durability (especially in edge wear/fraying). In fact, the weave pattern and tension has been carefully controlled to balance the opposing properties of durability and soak-ability. The result is an optimum capillary effect for fuel soakage and transfer out to the flame whilst still ensuring excellent flame and abrasion resistance and overall strength. It is also lightweight, and has good flexibility, drapability and non-stretch characteristics.

Rest assured our wick does not contain any asbestos (often used in fire proofing), which is known for causing cancer when inhaled. Neither does it contain any sharp or skin burning metallic thread. Metallic threads are sometimes added to give a sense of strength and durability, but we have found the thin metal fibers become brittle with the heat and break to create a hazard to users � especially if performing wraps or fire eating.

Specifications

�25mm wide x 1.6mm THIN
�Long life Kevlar � coated glass fibre
�High temperature resistance 650 deg.
�Excellent edge wear resistance

Unicycle Stands

info@jugglegear.com (Peter Van Thiel) — Thu, 18 Jun 2009 19:34:35 -0600

Store your unicycle easily with this special stand. Made of quality steel, coated with rubber. For unicycles with wheel sizes up to 20" and 24" versions.

How to ride your Unicycle

info@jugglegear.com (Peter Van Thiel) — Thu, 13 Aug 2009 14:27:11 -0600

A well written book by one of the most famous British performers of modern times.

Anyone can learn to ride a unicycle, and this well-illustrated step-by-step guide shows you how. From your first faltering one-wheeled wobbles to incredible feats of balance on a giraffe unicycle or an ultimate wheel, Charlie Dancey gives you the tips and tells you the secrets that turn the impossible into reality. With comprehensive safety advice, hints on maintaining your unicycle, the rules of unicycle gladiators and unicycle jousting, this is a book that every budding unicyclist should have.

32 page paperback. ISBN 1 898591 18 0.

Free shipping on this item

Replacement Diabolo Handstick Set

info@jugglegear.com (Peter Van Thiel) — Thu, 13 Aug 2009 13:36:31 -0600

Made from solid maple for great control. Half by sixteen inches in length. Comes with tied string.

Add rubber black hand grips +$2.00

Uni Magazine

info@jugglegear.com (Peter Van Thiel) — Sun, 14 Feb 2010 10:21:25 -0700

Each issue is $12.00 CAD and Includes Free shipping with in Canada. - Be sure to check which issues you would like at the bottom.

Unicycling gets its own dedicated international magazine! Uni is a full colour quarterly publication produced by, and aimed at those who genuinely love unicycling. With contributions from experts in every field, the magazine will cover events across the globe and all aspects of unicycling, composing an authoritative information source for the international community.

More Informations: "The Unicycle Magazine"

Issue 10 contains:

Kris Holm on how to descend rough terrain
Test of unicycle handles
Unicycle ride across Panama
Reports from Molveno, Italy
How to pass level 4
Instruction to 3 great mounts
A great guide to street performing
Interview with Joe Hodges

Issue 9 contains:

Steve Colligan completes his extraordinary trip from Lhasa to Khatmandu via Everest.
Kris Holm divulges the art of ascending rough ground.
Tutorials are on Level Three skills and how to strip a frame.
Events covered are the Arizona and British MUni weekends.
Of course we still have the ultimate buyers guide to the main unicycle brands in the world and the usual news, reviews, patent
review and more ... and much more ...

Issue 8 contains:>
The first time anywhere, a comparison of all the standard, quality unicycles available in the world. This is the ultimate buyers guide.
Kris Holm details his system for comparing Trials lines
Sam Shuster follows up his British Medical Journal article on reactions to unicycling
Mike Tierney shows us how to make use of the end of the skiing season
Part one of Steve Colligan's amazing trip from Lhasa to Khatmandu via Everest.
This issue's Group tests are on 36" tyres and Multi Tools
We still have the usual news, reviews, patent review and a great snack recipe from a long-distance cyclist ... and much more ...

Issue 7 Contains:>
The guide to athletic sponsorship
Keeping single track single
An xc kind of guy Ken Looi
Tire lever tests
More news and product reviews
and more...

Issue 6 contains:>
reports from Unicon XIV - the Unicycle World Championships and interviews with three World Champions: Adrien Delecriox, the first (and so far only) man to land a forward somersault in a street competition; Seisuki Kobayashi, MUni and Racing Champion and Emiko Kimura, coach of the consistently-high performing Toyoda group.

Issue 5 contains:>
All about "Ride the Lobster" - Results, Teams and more
New Products
How to Build a Wheel
How to: Stillstand and Ride Balance Lines
Test: Seat Clamps
Control and Balance: The Power of Pilates

Issue Four (Spring 2008) contains:>
Koxx-One and Inner Balance DVD - Report
GMTW 2007
24hour unicycling record
Unicycle touring
How to unispin
... and much more ...

Issue Three (Spring 2007) contains:>
Union DVD - Report
Ride the Lobster
Hang up Unicycles
Extrem Unicycling in New Zealand
Maintenance
Carbs
Cold Weather Riding
Muni in the Netherlands
Travelling the World with a Coker
Higher, Faster, Stronger - The Rider's Guide to Power
... and more ...

Issue Two (Autumn 2006) contains:>
Ride down a volcano in Peru
Dan Heaton interviewing Kris Holm
Insight to video filming techniques
Florian Schlumpf Interview
Event Reviews: NAUCC, Unicon 13, Warwick Unicycle Races
How to Crankflip
... and more ...

Issue One (Summer 2006) contains:>
Kris Holm interviewing Dan Heaton
Taiwan ride review from Roger Davis
Head-to-head comparison of six saddles
Interview with George Peck
How to crash at 30 km/h
... and more ...

Every issue contains event previews and reviews, columns, interviews, product tests, a comprehensive worldwide event calendar, photo gallery and more.

Please note! This Magazine are only available in English !

Kris Holm Seat Handle and Rear Bumper

info@jugglegear.com (Peter Van Thiel) — Tue, 05 Jan 2010 15:00:47 -0700

Replacement handle for your Kris Holm seat. Black, fits on front of saddle. Available with Black rear bumper.

Nimbus Alloy Reinforced Seatpost (25.4mm)

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:56:12 -0600

Help your unicycle lose weight with this lightweight aluminium alloy seatpost. Made from extra-thick aluminium tubing for extra strength.

Weighs 300g, almost half the weight of an equivalent steel seatpost.
350mm long, 25.4mm diameter
anodised black.
4mm thick aluminium for extra strength these are not just reinforced at the top, but the entire length.
Will fit most unicycle saddles with standard 4-bolt fittings (not Miyata).

One Wheel-No Limit DVD

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Dec 2008 14:56:18 -0700

One Wheel - No Limit, the popular freestyle video now available in DVD format. The DVD features some of the most talented unicyclists in the world as they perform a wide range of freestyle unicycling skills and tricks.

With over 200 clips, this hour-long DVD shows basic skills and many, many difficult moves - everything from easy mounts to skills past Level 10. If you are a beginner or an expert this DVD is for you. You can see the basics at the bottom end and can marvel at what the champions can do. Now with the new DVD easy to use interactive menu you can go directly to the tricks or sections you want to focus on. Indexed by trick name or by skill level.

NTSC multi-region DVD format (will work on the majority of DVD players). Directed by Andy Cotter, digitally remastered and fully indexed. Length 60 minutes.

Free shipping on all DVD's

20� Nimbus X Unicycle ISIS

info@jugglegear.com (Peter Van Thiel) — Fri, 02 Apr 2010 10:14:40 -0600

This is the top of the Nimbus freestyle range. This unicycle comes with the new CrMo Nimbus X longneck frame in chrome and the new Nimbus ISIS hub and cranks.

The 2007 Nimbus X frame is VERY special, it has been designed with the help of the TCUC unicycle club.
The CrMo frame fork legs are tapered up to the optimum crown width for freestyle unicycling.
The crown has zero external overhang.
The seatpost is 22mm diameter (rather than 25.4mm) to allow the foot to get closer to the centre of balance when doing stand-up tricks.
The frame has been constructed with an internal 120mm reinforcement tube interlocked with the crown greatly improving strength and durability over previous long-neck frames.
The bearing housings are machined rather than pressed for smooth movement and longer bearing life.

Chrome frame option available in 3 sizes: 150mm, 300mm or 400mm (measured from crown to top of seat tube). The longer seat tube enables the seatpost clamp to be closer to the saddle, this protects your legs and your seat post.
Now with Nimbus ISIS hub for extra strength and wide choice of cranks.

Features:

Nimbus X CrMo longneck frame in Chrome.
Machined bearing housings.
Minimal tire to frame clearance to help with stand up tricks.
Nimbus ISIS hub with sealed 42mm bearings.
48 stainless steel spokes.
Aluminium eyeletted double-walled rim anodised in Red, Blue or Black.
114mm aluminium ISIS freestyle cranks.
Kenda Kikzumbut 20x1.95� high pressure freestyle tyre, White.
Nimbus double-bolt seatpost clamp.
Large plastic platform pedals, 9/16� thread.
300mm long, knurled 22mm dia. reinforced seatpost.
Nimbus Gel Saddle, Black with Red, Blue or Black panel to match rim with Nimbus logo.
Weight: 5kg. (with 150mm frame)

You should get the tallest frame you can fit on:

Frame Size	Minimum Leg Length	Cut down minimum	Maximum Leg Length
150 mm	31 1/2" (80cm)	24" (61cm)	32 1/2 (83cm)
300 mm	32" (86cm)	30" (76cm)	38 1/2 (98cm)
400mm	34" (86cm)	-----	42 1/2 (108cm)

Dodger 12" Unicycle

info@jugglegear.com (Peter Van Thiel) — Mon, 15 Feb 2010 12:57:48 -0700

Ideal first unicycle for smaller children at a very competitive price. Small enough for 5 year olds.

12" chrome unicycle. Sealed bearings in aluminium lollipop style bearing housings which are ideal for learners. Comes with aluminium quick-release seat bolt as standard. Plastic seat with moulded foam upper and hard plastic bumper, 25.4x220mm knurled seatpost. Indoor/street tyre with Schrader valve fitting (car valves). Robust Plastic pedals. 89mm length cranks.

Leg length sizes: Max 23" (58cm), Min 19.5" (50cm), cut down seat post Min 18" (46cm) Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

If you really want fun try ordering one of these and a long seat post.

These unicycles are intended for beginners and not recommended for advanced tricks.

To see which size you need click here

Kris Holm Spooner Brake Lever Extention

info@jugglegear.com (Peter Van Thiel) — Mon, 07 Dec 2009 13:41:23 -0700

Effective braking on a unicycle is a learned technique that goes far beyond simple use as a drag. With practice, effectively using a rim brake increases traction, increases control on drops to slopes, reduces fatigue on bumpy descents, and even increases speed by smoothing out your pedaling. A secure grip on your brake lever is essential for all of this

Kris Holm Trials Unicycle

info@jugglegear.com (Peter Van Thiel) — Fri, 02 Apr 2010 10:07:09 -0600

Carefully crafted to withstand abuse while remaining lightweight, the KH20 trials unicycle is built specifically for trials riding. Also a great kids mountain unicycle.

Featuring:

7005 T6 Aluminium frame.
KH Moment� ISIS hub,
137mm KH Moment� 7075 Aluminium cranks
Fusion Street gel saddle
19� x 47mm, 36 hole, double wall KH rim with eyelets
High strength 13 gauge spokes
Wheel-size: 19� (rim diameter).
Colour: Dark Blue with high durability glossy clearcoat, laser etched logo.
Frame: 7005 T6 Aluminium alloy, ovalised tubing.
Hub: New Kris Holm Moment� Isis Hub.
Cranks: 137mm Kris Holm Moment� 7075 solid Aluminium.
Pedals: Odyssey Jim Cielencki pedals (black), 9/16 thread.
Rim: New Kris Holm 19� Trials rim, 36 hole, 47mm wide, with cutaway to save weight and eyelets for extra strength.
Saddle: Kris Holm Fusion Street gel saddle with handle and removable cover.
Seatpost: Reinforced aluminium 27.2x350mm bolt-on style.
Tire: 20x2.5" Maxxis Creepy Crawler trials, black with schrader valve.
Spokes: New Black stainless steel 13G to make a stronger wheel.
Seatpost clamp: New double-bolted, aluminium.
Weight: 5.6kg (12 �lb). Minimum leg length: 33" (84cm) ( 25" (64cm) if you cut the seatpost down) - measured crotch to floor not trouser length.

Kris Holm Seat Post Clamp (2009)

info@jugglegear.com (Peter Van Thiel) — Mon, 18 Jan 2010 15:30:31 -0700

27.2 seat post clamp, compatible with all Kris Holm unicycles! Order the standard/original Black clamp, or brighten up your cycle with a new colored clamp as an upgrade! Colors match Kris Holm Saddle Covers and saddles.

Limited edition Switch T shirt

info@jugglegear.com (Peter Van Thiel) — Sun, 13 Dec 2009 15:58:27 -0700

Limited edition Switch T shirt - Yes that is right from the Magazine. Or if you want a free T shirt just buy a unicycle -

Maxxis Creepy Crawler 19 x 2.5 Trials Tire

info@jugglegear.com (Peter Van Thiel) — Fri, 28 Aug 2009 13:54:02 -0600

Lightweight trials tire made from a soft rubber compound for extra grip designed by record breaking (bike) trials rider Dani Comas.

20x2.5" tire to fit trials rims, will not fit standard 20" rim.
Large volume tire for extra bounce and shock absorption.
Size: 20x2.5" (67-387)
Rim Size: Trials 20" (19") (actually 396mm)
Colour: Black
Type: Trials, Bouncing
Pressure: 35-50 PSI
Weight: 1020g

Nimbus Venture Alloy Crank Set (ISIS)

info@jugglegear.com (Peter Van Thiel) — Mon, 07 Dec 2009 13:49:43 -0700

High-quality machined 7075 T-6 aluminum cranks. Sold in pairs.

75mm (g) Silver pair
89mm (g) Silver pair
100mm (g) Silver pair
114mm (g) Black pair
125mm (380g) Black pair
152mm (430g) Black pair.
165mm (g) Black pair.

You will be amazed the difference having lightweight cranks can make.

DX Style Pedals

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:57:13 -0600

Aluminium bodied pedals with steel pins in lots of different colours, great for muni or trials unicycling.

The essential item for any off road or outdoor unicycle. The large platform gives good grip under almost any conditions and the steel studs give an enhanced grip in the wet as well as extending the pedals life.

DX style BMX pedals with steel inserted studs.
Cast aluminium body.
9/16" thread.
Weighs 570g (pair).

Sold in pairs

DX Style Pedals

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:57:13 -0600

Kevlar rope 3/8 -- sold per foot

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 19:16:03 -0600

3/8 inch diameter thick absorbant KEVLAR� WICK rope
10mm diameter

3/8 inch round braided KEVLAR� WICK.

Our WICK is KEVLAR� coated glass fibre engineered for excellent wear resistance at high service temperatures. While most synthetic textiles offer little protection beyond 350 degrees F. our WICK offers continual protection to 650 degrees.

It is lightweight, has excellent strength and abrasive resistance, good flexibility, drapability and non-stretch characteristics.

Specifications
Long life KEVLAR� coated glass fibre
3/8 inch diameter (10mm)
High temperature resistance 650 deg.
Strong diagonal weave
Excellent edge wear resistance

Nimbus Double Bolt Clamps 25.4mm - New Colors

info@jugglegear.com (Peter Van Thiel) — Tue, 05 Jan 2010 14:22:33 -0700

Double bolt seat clamp as fitted to the Nimbus Muni, Nimbus Trials and Nimbus ii unicycles.

High quality double bolt clamp to fix to any of the Nimbus,Club Freestyle, Trainer or Dodger range of unicycles with a 25.4mm seat post. Gives stronger clamping than a standard quick-release clamp so helps to reduce seat twist. Weighs 64g.

Time to add some color to your unicycle!

Nimbus Double Bolt Seat Clamp - 22.0mm

info@jugglegear.com (Peter Van Thiel) — Tue, 05 Jan 2010 14:15:41 -0700

Double bolt seat clamp as fitted to the Nimbus Muni, Nimbus Trials and Nimbus X unicycles.

High quality double bolt clamp to fix to any of the Nimbus, Trainer or Dodger range of unicycles with a 22.0 or 25.4mm seat post. Gives stronger clamping than a standard quick-release clamp so helps to reduce seat twist. Weighs 64g.

Performance Diabolo String

info@jugglegear.com (Peter Van Thiel) — Thu, 01 Oct 2009 15:04:57 -0600

25m - Florescent yellow diabolo string. Very round and tightly woven diabolo string with a braided core. This string fits Xtreme diabolo handsticks and any wooden handsticks. 25m Roll

Brake Mount for Kris Holm Style Seats

info@jugglegear.com (Peter Van Thiel) — Tue, 05 Jan 2010 15:01:44 -0700

Great for mounting a hydraulic brake on cycles! Works with the Kris Holm, Qu-Ax and Torker DX seats!

Kris Holm Adjustable Post

info@jugglegear.com (Peter Van Thiel) — Mon, 07 Dec 2009 14:15:01 -0700

This design features an extrusion-forged top bracket with infinite adjustability potential, and eliminates the need for a rail type adapter.

This seat post has a standard four bolt configuration, and is compatible with Nimbus, Kris Holm, Schwinn, Classic, Torker CX, United, and Onza saddles. Please check your cycle's seatpost diameter before ordering a replacement seat post.

Kris Holm Fusion Freeride Saddle

info@jugglegear.com (Peter Van Thiel) — Fri, 29 Jan 2010 09:46:47 -0700

Completely upgraded for 2009, the Kris Holm Fusion Freeride saddle is designed for muni, distance touring, and all-around use.

Features

Comfortable and shock absorbent dual density foam
30mm center cutaway to reduce pressure in critical areas
Stiff and strong saddle frame
Removeable cover with a breathable stretch-nylon top panel
Bumpers and seatpost are secured with low profile 4mm hex bolts
Saddle frame and rear bumper are constructed from recyclable materials
Weight: 816 g

16" Green Gecko

info@jugglegear.com (Peter Van Thiel) — Mon, 29 Mar 2010 14:02:52 -0600

Ideal first unicycle for the younger child at a very competitive price.

16" fun unicycle ideal for learners. Sealed bearings in split-bearing housings which are stronger than lollipop bearing-housings. Comes with quick-release seat bolt as standard.

These unicycles are intended for beginners and not recommended for advanced tricks or people over 60lbs.

Features

Saddle � black.
Seat Post � 22.2mm x 200mm steal post
Seat clamp � quick release
Frame � Powder coat white
Wheel set
Rim � powder coat bright green
Spokes � 28 x 14g black
Hub � black
Cranks � 102mm length cranks black
Tire � WandaKing (black) Indoor/street tire with Schrader Valve fitting (car valves).

CrMO Nimbus Seatpost (27.2mm & 25.4)

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 15:54:44 -0600

A super strong alternative to aluminium or steel unicycle seatposts. Especially recommended for trials and off-road unicycling.

The 27.2mm will provide a stronger upgrade for Kris Holm, Koxx and Onza unicycles.
The 25.4 mm will up grade the nimbus unicycles

Features:
Black
350mm long
Super strong CrMO construction
27.2 & 25.4 mm diameter
Weigh 500g (27.2mm)
Fits all standard saddles (eg 4 bolt fitting).

Defect DVD

info@jugglegear.com (Peter Van Thiel) — Mon, 28 Sep 2009 18:34:10 -0600

The latest release from Syko Productions featuring some of the best trials rider in the world.

In Defect, a handful of world-class riders challenge perceptions by bringing you the latest innovations in street, mountain and trials unicycling. Defect combines ground-breaking film making with a fresh soundtrack and bonus rider commentary, to showcase the action and personalities of this rapidly emerging sport.

Riders Include:
Dan Heaton, Kris Holm, Ryan Atkins, Jeff Groves, Xavier Collos, Sabin Arditty, Brian Lundgren, Mike Clark, Zack Baldwin, Kaori Matsuzawa, Kevin McMullin, Shaun Johanneson, Keaton Miller, and more

Feature Length: 40 minutes

Bonus Features:
Extra Sections
Rider Profiles
Extra Footage
Commentary French & German Subtitles

Soundtrack:
1881, 800 Octane, Shadowville Productions, Shakedown, Strap-On Tools, Ordinary Peoples, Run-On Conscious, Voice in the Wire, and more.

Free shipping on all DVD's

Flame Stickers

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 10:43:31 -0600

These stickers dress up any frame! In several bright colors! Sold in pairs.

Into the Thunder Dragon Video / DVD

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 11:06:25 -0600

A mountain unicycle odyssey in the Himalayan kingdom of Bhutan! Starring Kris Holm and Nathan Hoover.

Wild riding in the high Himalayas! Kris Holm and Nathan Hoover tackle thousand year old trading roads in a trek across the remote Kingdom of Bhutan. Parts of Bhutan had never seen wheeled traffic before these two visited. The narrative of this epic unicycle journey is intercut with trials segments, beautiful scenery and baffling Bhutanese gambling games.
Filmed for Outside Television by Sean White, producer of Unizaba, One Tired Guy and Whitetrax this is one movie you'll want to watch again and again.

DVD edition has additional bonus features, including riding tips from Kris Holm himself.

Feature length 47minutes.

Free shipping on all DVD's

Kevlar wick 2.5 x 1/8 inch - sold per ft

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 19:12:28 -0600

Our fire wick is based around the durable Kevlar � organic (para-aramid) fibre, enhanced with our special blend of non-irritant clothing grade fiberglass yarn. The continuous filament fiber we use is about as good as it gets when balancing absorbency, strength, durability, fire rating and user comfort.

Specifically woven into our commercial grade, high absorbency, flameproof textile, with increased absorbency and all wefts (horizontal threads) doubling back on themselves for greater durability (especially in edge wear/fraying). In fact, the weave pattern and tension has been carefully controlled to balance the opposing properties of durability and soak-ability. The result is an optimum capillary effect for fuel soakage and transfer out to the flame whilst still ensuring excellent flame and abrasion resistance and overall strength. It is also lightweight, and has good flexibility, drapability and non-stretch characteristics.

Rest assured our wick does not contain any asbestos (often used in fire proofing), which is known for causing cancer when inhaled. Neither does it contain any sharp or skin burning metallic thread. Metallic threads are sometimes added to give a sense of strength and durability, but we have found the thin metal fibers become brittle with the heat and break to create a hazard to users � especially if performing wraps or fire eating.

Specifications

�65mm wide x3.2mm thick
�Long life Kevlar � coated glass fibre
�High temperature resistance 650 deg.
�Excellent edge wear resistance

Kris Holm Double Hole ISIS Moment Cranks

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 10:52:09 -0600

**Now in 110 /127mm.***
These allow you to have the ideal crank lengths for both road/easy cross-country riding and aggressive off-road riding, without having to have 2 pairs of cranks.

Having these cranks on the KH 29 unicycle adds a huge amount of smoothness to a ride, and it's easy to switch mid-ride if you, say, commute on a road to your off-road ride.

The I-beam shape of the Moment cranks makes it possible to add a second hole at 125mm or 137mm length without significantly reducing the strength of the crank. However, if you purely focus on big drops/aggressive downhill we would still recommend the solid cranks.

Features:
ISIS spline is strong and creak-free.
Incredibly stiff with an I-beam shape that concentrates metal in high stress areas.
High tensile strength 7075 T6 Aluminium, polished.
10mm Q-factor (outwards flare) keeps a narrow profile while maintaining adequate ankle
bone clearance.
Broad, flat profile is optimised for trials and street riding.
CroMo pedal inserts.
Weight (pair): 655g These cranks are available in two sizes 150mm (with an extra hole at 125mm) and 165mm (with an extra hole at 137mm).

These will fit all ISIS hubs except Koxx ISIS hubs.

Sold in pairs.

Maxxis Hookworm 26 x 2.5-inch wide Freestyle tire

info@jugglegear.com (Peter Van Thiel) — Thu, 11 Jun 2009 16:25:07 -0600

Wow what a tire! An all-new grippy Freestyle tire. Maxxis have now made their legendary hookworm tire for a 26" wheel.

This huge volume tire with its super grippy freestyle tread gives you a brilliantly smooth ride. The tread goes from rim edge to rim edge so you grip whatever the angle you are riding at. The larger volume helps you go faster too, as fitted on the Nimbus 24" freestyle unicycle range. Made with 2-ply casing with butyl insert for extra strength.

Size: 24x2.5" (61 - 507)
Rim Size: 26"
Colour: Black
Type: Freestyle, Urban Downhill
Pressure: max 65 PSI (4.5 Bar)
Weight: 1000g

Available with schrader valve inner tube or without.

Signature Distroyer Nimbus Trials 19" ISIS

info@jugglegear.com (Peter Van Thiel) — Sat, 13 Feb 2010 20:30:53 -0700

A great entry-level trials unicycle with its large volume tire and new super strong ISIS CroMo hub that will allow you upgrade should you want in the future to the KH ISIS cranks.

Featuring:

Wheel-size: 19� (rim diameter).
Frame: Steel, Nimbus II style with 42mm machined bearing housings.
Hub: New Nimbus ISIS Hub, with CrMo spindle.
Cranks: 125mm nimbus Venture ISIS cranks.
Pedals: Nimbus DX style pedals (black) with steel pins, 9/16 thread.
Rim: Black hard-anodised eyeletted double-walled 19" x 42mm 36 hole trials rim..
Saddle: Nimbus gel saddle - with Nimbus logo on back.
Seatpost: Reinforced aluminium 25.4x300mm bolt-on style.
Tire: 20x2.50" Maxxis Creepy Crawler trials, black with schrader valve.
Spokes: 14G.
Seatpost clamp: New double-bolted, aluminium.
Weight: 5.7kg (12.5lb).

Legs length sizes: Min 720mm (28") cut down seat post min 610mm (24").
Note that these sizes are from the crotch to the floor wearing shoes, not trouser sizes.

UDC T shirt

info@jugglegear.com (Peter Van Thiel) — Tue, 13 Oct 2009 16:44:19 -0600

Were proud to offer this UDC Canadian logo T shirt. Currently Available in:

new -- Yellow/black, Orange/black, or Green/Black

Now all T-Shirts are free shipping...

Juggling Rings

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Dec 2008 15:00:01 -0700

12 3/4" 113g - These rings are preferred by professional jugglers all over the world. Tough polypropylene in bright colors with soft smooth edges.

Kevlar wick 4 x 1/8 inch

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 19:14:47 -0600

Our fire wick is based around the durable Kevlar � organic (para-aramid) fibre, enhanced with our special blend of non-irritant clothing grade fiberglass yarn. The continuous filament fiber we use is about as good as it gets when balancing absorbency, strength, durability, fire rating and user comfort.

Specifically woven into our commercial grade, high absorbency, flameproof textile, with increased absorbency and all wefts (horizontal threads) doubling back on themselves for greater durability (especially in edge wear/fraying). In fact, the weave pattern and tension has been carefully controlled to balance the opposing properties of durability and soak-ability. The result is an optimum capillary effect for fuel soakage and transfer out to the flame whilst still ensuring excellent flame and abrasion resistance and overall strength. It is also lightweight, and has good flexibility, drapability and non-stretch characteristics.

Rest assured our wick does not contain any asbestos (often used in fire proofing), which is known for causing cancer when inhaled. Neither does it contain any sharp or skin burning metallic thread. Metallic threads are sometimes added to give a sense of strength and durability, but we have found the thin metal fibers become brittle with the heat and break to create a hazard to users � especially if performing wraps or fire eating.

Specifications

�100mm wide x 3.2mm thick
�Long life Kevlar � coated glass fibre
�High temperature resistance 650 deg.
�Excellent edge wear resistance

Kris Holm - evolution T shirt

info@jugglegear.com (Peter Van Thiel) — Tue, 22 Sep 2009 12:17:30 -0600

Kris Holm T-bar Touring Handle

info@jugglegear.com (Peter Van Thiel) — Tue, 05 Jan 2010 14:52:20 -0700

The T-bar Touring Handle significantly improves distance riding comfort by shifting the rider into a more "bike-like" position. This position reduces pressure at the front of the saddle providing a more comfortable ride.

Features

Simple and Strong
Fully adjustable height and length
Includes saddle reinforcement plate
Bar-ends are replaceable if damaged
Brake lever position between bar ends allows two-hand braking
Weighs 602 g
Note: Compatible only with 2009 Kris Holm Fusion Saddles and 2009 Nimbus Gel Saddles.

Magura Brake Clamps

info@jugglegear.com (Peter Van Thiel) — Mon, 07 Dec 2009 13:40:58 -0700

To attach Magura HS33 brakes to a frame with Magura brake bosses you will need these clamps.

Two pairs of clamps and two pairs of screws to fit onto braze on mounts.
Colour may vary from those illustrated.

Nimbus Venture Alloy Crank Set (cotterless)

info@jugglegear.com (Peter Van Thiel) — Mon, 07 Dec 2009 13:48:32 -0700

High-quality machined 7075 T-6 aluminum cranks. Sold in pairs.

Upgrade your unicycle with these weight-saving cranks.
75mm (g) Silver pair
89mm (g) Silver pair
100mm (g) Silver pair
114mm (g) Black pair
125mm (380g) Black pair
152mm (430g) Black pair.

You will be amazed the difference having lightweight cranks can make. Not recommended for heavy jumping.

CRUISER 26 x 2.125 Nightwing

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 15:33:56 -0600

22 TPI / Wire Bead

Take it out on the streets. Smack up some asphalt. We like this urban camo pattern a lot for all kinds of reasons. Not the least of which is the fact that it looks like it could tear the road a new pothole.

This super wide profile tire gives you a smooth comfy ride on the sand, on the boardwalk and on the street.

Generic Tubes

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 08:50:46 -0600

Quality Generic Tubes

Nimbus 20" Aluminium Ultimate Wheel

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 11:10:45 -0600

Want a real challenge, try this! This is the hardest of our ultimate wheels.

Featuring
� Ultra-stiff 7005 aluminium frame.
� Available in anodised Blue.
� Reinforced pedal bosses.
� Skinny high-pressure tyre.
� Single bar construction.

Wheel Size: 20�
Weight: 1.8kg (4lb)
Colour: Blue hard-anodised.
Pedals: Round pedals, 9/16 thread.
Pedal pitch: 250mm (same as 125mm cranks on unicycle)
Tire: 20x1.75" high pressure.

Onza Sticky Fingers 19x2.5 Trials Tire

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:37:17 -0600

Dual compound tire with hard outer tread and soft sticky centre tread for better grip.

20x2.5" tire to fit trials rims, will not fit standard 20" rim. Large volume tire for extra bounce and shock absorption.

Size: 20x2.5" (67-387)
Rim Size: Trials 20" (19") (actually 396mm)
Colour: Black with grey centre tread
Type: Trials, Bouncing
Pressure: 40 PSI
Weight: 1150g

Pedal Wrench-Socket Combo Tool

info@jugglegear.com (Peter Van Thiel) — Fri, 19 Jun 2009 15:35:55 -0600

Dual ended tool includes two sizes of sockets, 14-mm, the typical axle nut/bolt size, 15-mm and a pedal wrench. The handle is made of alloy to keep it light and portable with a plastic coating for comfortable use. Total length: 310mm.

PURPLE HIBISCUS 20 x 1.90 FREESTYLE DIRT

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 15:29:41 -0600

22 TPI / Wire Bead

The Purple Hibiscus design is inspired by the popular Hawaiin flower.

Meet our all-around BMX tread with a tightly spaced knobby pattern.

Commuter 36-inch tube

info@jugglegear.com (Peter Van Thiel) — Mon, 06 Jul 2009 14:48:11 -0600

Replacement tube for the Radial 36-inch, Nimbus 36-inch, Nimbus Deluxe 36-inch, Coker Deluxe 36-inch, Wheelman.

Duro 24 x 3.0 Heavy-weight Tube

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:10:41 -0600

A great tube for your downhill unicycle

DX Plastic Pedals

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 16:17:52 -0600

Large platform plastic bodied pedals as fitted to many of the Nimbus freestyle unicycles.

Large-platform pedals give you more grip and stability when unicycling and being plastic bodied means you can use them indoors. 9/16 thread so will fit nearly all cranks. Weighs 310g (per pair).

Sold in Pairs.

Glow Juggling Balls

info@jugglegear.com (Peter Van Thiel) — Mon, 31 Aug 2009 07:16:12 -0600

These are juggling versions of our popular LED poi.

KEVLAR sewing thread 67 metres

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 18:55:00 -0600

Pure KEVLAR � thread 75 yards (67m) per snap spool
perfect for those making their own equipment sewing together KEVLAR � belts and ropes.

One Tired Guy DVD

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 11:06:47 -0600

KRIS HOLM defines new freeride mountain unicycle standards in this extraordinary collection of action and adventure films!
**Now available on DVD.**

ONE TIRED GUY features...

"SKILLETTO" - This award-winning filmshort highlights Kris riding the Vancouver North Shore, urban trials, and very scary slickrock atop the Stawamus Chief in Squamish, BC.

"WHITETRAX" - Think that mountain unicycles are only good for rocks and dirt? Think again. Watch Kris tackle mogul ski slopes steep hardpack and a snowboard terrain park in Whistler.

"UNIZABA" - An adventure on Mexico's highest volcano, El Pico de Orizaba. Kris is joined by Nathan Hoover as they ride terrain ranging from rooftops in Mexico City to rock-strewn slopes on a wild descent down Orizaba's south face.

23 minutes.

Free shipping on all DVD's

Onza Sticky Fingers 20x2.4"

info@jugglegear.com (Peter Van Thiel) — Tue, 26 Jan 2010 15:59:49 -0700

A trials tire that will fit on a standard 20" rim! A dual compound tire with extra grippy central tread.

Large volume tyre for extra bounce and shock absorption. This is the largest volume tire we have found that will fit on a standard 20" rim (it will also fit in our standard 20" frame). This will convert a normal 20" unicycle into a trials style unicycle.

Size: 20x2.4" (64-406)
Rim Size: Standard 20" (406mm)
Colour: Black with Grey centre tread.
Type: Trials, Bouncing.
Pressure: 40 PSI (275kPa)
Weight: 935g (33 oz)

THIN KEVLAR � WICK 2 x 1/16inch -- sold per foot

info@jugglegear.com (Peter Van Thiel) — Tue, 11 Aug 2009 18:55:41 -0600

Our fire wick is based around the durable Kevlar � organic (para-aramid) fibre, enhanced with our special blend of non-irritant clothing grade fiberglass yarn. The continuous filament fiber we use is about as good as it gets when balancing absorbency, strength, durability, fire rating and user comfort.

Specifically woven into our commercial grade, high absorbency, flameproof textile, with increased absorbency and all wefts (horizontal threads) doubling back on themselves for greater durability (especially in edge wear/fraying). In fact, the weave pattern and tension has been carefully controlled to balance the opposing properties of durability and soak-ability. The result is an optimum capillary effect for fuel soakage and transfer out to the flame whilst still ensuring excellent flame and abrasion resistance and overall strength. It is also lightweight, and has good flexibility, drapability and non-stretch characteristics.

Rest assured our wick does not contain any asbestos (often used in fire proofing), which is known for causing cancer when inhaled. Neither does it contain any sharp or skin burning metallic thread. Metallic threads are sometimes added to give a sense of strength and durability, but we have found the thin metal fibers become brittle with the heat and break to create a hazard to users � especially if performing wraps or fire eating.

With care this wick can last over 12 months of use

Specifications [top]
2" wide x 1/16" thin
30m roll
Long life KEVLAR � coated glass fibre
High temperature resistance 650 deg.
Excellent edge wear resistance

UDC Bearing Shims

info@jugglegear.com (Peter Van Thiel) — Thu, 18 Jun 2009 19:25:27 -0600

These enable you to fit hubs with 40mm bearings into frames designed to fit 42mm bearings.

These CNC-machined Aluminium shims fit the standard 6203-2RS bearings found on most cotterless hubs.

Sold in pairs, bearings not included.

UDC drip T shirt

info@jugglegear.com (Peter Van Thiel) — Tue, 22 Sep 2009 13:51:57 -0600

Another cool designed T shirt.

This is now one of our favorite T-shirts, cool colors, and a fresh urban feel.

Weka Fire Poi - Pair

info@jugglegear.com (Peter Van Thiel) — Thu, 13 Aug 2009 10:47:55 -0600

A popular FIRE set for beginners.

A solid and very effective design with no exposed hardware on the FIRE head. Strong twin finger handles for easier controlled swinging. Long life head is permanently attached to the cord. This set will suck in the fuel with a total of 4ft (1200mm) of thick absorbant kevlar�/glass tape.

Specifications
Comfortable double or single loop handles to manipulate POI with ease
Heat resisting gutsy 3.0mm stainless steel quicklinks
Strong flexible stainless steel 2.0mm 7x7 multistranded control cable Heavy duty 8.0mm brass barrel swivels
Total of 4 ft (1200mm) of 2 x 1/8 inch KEVLAR�/glass tape stitched with 100% pure KEVLAR � thread 150gm/pair
Free FIRE safety guide, fuel information, how to light and extinguish tools, and tips on use.

20" Pimp Cycle

info@jugglegear.com (Peter Van Thiel) — Sat, 13 Feb 2010 08:38:29 -0700

Funky new freestyle Unicycle in Black with Green or Pink tire.

This unicycle has everything that you will need to do even the most advanced freestyle tricks on. It also comes with a non-marking top quality freestyle tire so it can be used in gymnasiums.

Features:

Nimbus II frame for foot on frame tricks
Vibrant Green or Pink 20" Tire.
Club Freestyle saddle with handle to help with freestyle tricks.
Low tire to frame clearance to help with wheelwalking or stand-up tricks.

Specification:

Black Club Freestyle saddle with Black handle and bumper.
300mm long, knurled anti-twist 25.4mm dia. seatpost in Black.
Quick-release seatpost clamp
Nimbus II frame in Black with split bearing housings
Wide flange hub for greater wheel strength.
36 spokes.
Robust 36 hole Aluminium rim in Black.
Gusset 20" tire in Green or Pink.
114mm freestyle cotterless cranks.
Plastic freestyle pedals, 9/16� thread.

Club Saddle

info@jugglegear.com (Peter Van Thiel) — Wed, 06 Jan 2010 13:12:33 -0700

This saddle is the one used on the club unicycles. Uses the standard seat post with 4-bolt rectangular pillar bracket, first adopted by Schwinn. It is not compatible with Miyata or Torker LX seat posts.

Contoured, padded saddle. Uses the standard 4-bolt rectangular pillar bracket.
It is not compatible with Miyata or Torker LX seat posts.

CRUISER 26 x 2.125 Scorch

info@jugglegear.com (Peter Van Thiel) — Tue, 16 Jun 2009 15:34:27 -0600

22 TPI / Wire Bead

Yeah, the flame thing is an hot rod icon. Got it. We simply like this tire cause it looks like you just plowed through some molten lava.

This super wide profile tire gives you a smooth comfy ride on the sand, on the boardwalk and on the street.

Duro Wildlife 24" x3.0" Tire

info@jugglegear.com (Peter Van Thiel) — Sun, 21 Jun 2009 09:15:55 -0600

A wide, stable, and grippy off-road knobby tyre, as fitted to the Kris Holm and Nimbus 24" off-road unicycles.
Features:

Heavy-duty casing with extra thick sidewalls.
Apex and Double Bead-Lock snakebite prevention.
Aggressive side knobs for cornering bite
70mm wide over the knobbles.
Recommends using a rim of 28mm width or more, such as the Kris Holm
24" rims.
Size: 24x3.0"
Rim Size: 24" (actually 507mm)
Colour: Black
Type: Muni, Off-Road, Trials
Pressure: 15 - 35 PSI (1 -2.5 Bar)
Weight: 1495g

Euro Diabolo String

info@jugglegear.com (Peter Van Thiel) — Thu, 01 Oct 2009 15:04:25 -0600

25m- Many are saying that this is the best diabolo string on the market. This custom manufactured polyester diabolo string is sure to please. Very round and very tightly woven. Euro Diabolo string fits Xtreme diabolo handsticks and any other wooden or aluminum handsticks. 25m Roll

Kris Holm Aluminium Unicycle Frame

info@jugglegear.com (Peter Van Thiel) — Sun, 14 Feb 2010 10:57:03 -0700

New for 2008: stronger machined-butted seat tubes (machined seat tubes have thicker tubing sidewalls at the crown weld) resulting in a stronger crown. Crown is also lowered to improve fit over tire. Note: Bearing Housings included. Standard black KH seat post clamp at no additional charge.

7005 Aluminium alloy, ovalised tubing.
20" weighs 536g.
24" weighs 650g.
29" weighs 675g.
Dark Blue with high durability glossy clearcoat, laser-etched logo.
24" and 29" comes with Magura brake mounts (Magura clamps not included).
Machined 42mm bearing housing.
Fits 27.2mm diameter seatpost.
These new frames have been designed to give a tighter fit round the Duro Wildlife tire, and give you a lower footrest for gliding, but will not accommodate a squarer tire like the Gazzaloddi.

Picture shows 24" model.

20"

24"

29"

Nimbus 24" Aluminium Ultimate Wheel

info@jugglegear.com (Peter Van Thiel) — Wed, 17 Jun 2009 11:11:14 -0600

A really dynamic design of ultimate wheel. Although harder to ride than the 28", the 24" is the most common size for tricks.

Featuring
� Ultra-stiff 7005 aluminium frame.
� Available in anodised Blue.
� Reinforced pedal bosses.
� Skinny high pressure tyre.
� Dynamic construction.

Wheel Size: 24�
Weight: 2.65kg (5lb 13oz)
Colour: Blue hard anodised or powder coated Lilac.
Pedals: Round pedals, 9/16 thread.
Pedal pitch: 300mm (same as 150mm cranks on unicycle)
Tire: 24x1.75" high pressure.

Nimbus Two-Wheeler Extension Kit

info@jugglegear.com (Peter Van Thiel) — Tue, 04 Aug 2009 10:17:51 -0600

Need a new challenge? You need a two-wheeler! This extension kit fits on your 20" unicycle and adds an extra wheel.

Extension Kit specs:

Chrome plated steel fork blades.
Kenda Kikzumbut 20x1.95" tyre.
Unicycle.com CroMo Hub.
Black alloy 36 hole Nimbus rim.
Comes with bearing cups and bolts.
Will fit any unicycle with standard split-bearing housing.

Odd Bike Helment

info@jugglegear.com (Peter Van Thiel) — Mon, 01 Feb 2010 08:30:57 -0700

Accidents are relatively rare on unicycles, but if you are thinking of doing any trials of extreme off-road unicycling you ought to consider wearing a helmet.

Features

Removable washable lining
Secure snap buckle
Dense plastic outer with styrene foam inserts
CE & EN1078 approved

Some competitions insist on you wearing a helmet.
Gloss black skate style helmet with hard plastic shell and foam inner. Can also be used for other sports like skateboarding, mountain boarding, trials or bmx.

Available in one size small - large adult

Odyssey Twisted PC Plastic

info@jugglegear.com (Peter Van Thiel) — Sat, 20 Jun 2009 10:16:57 -0600

Plastic composite version of the Twisted platform pedals with a lightweight concave body for maximum traction and shoe contact. As supplied with Kris Holm 2009 unicycles.

Plastic-Pedals with a superb price-performance ratio!

The Odyssey Twisted PC Pedals are the favorite Street pedals.

Light, strong and low priced
Weigth: 410g.
Black.
9/16 thread.